8 October 2020

Since October 8, 2020 LLC “Plant of platform gratings” has launched a workshop for the manufacture of a new product line - reinforcement mesh.

Since October 8, 2020 LLC “Plant of platform gratings” has launched a workshop for the manufacture of a new product line - reinforcement mesh.

While steel lashing at sites is still popular in Ukraine, the construction industry in neighboring countries has long been using ready-made reinforcement mesh, which only needs to be assembled at the site. After all, reinforcement mesh is much cheaper and more durable in manufacture and use.

“Plant of platform gratings” offers its customers reinforcement mesh with a bar diameter from 5 to 16 mm and mesh pattern based on axes of extreme bars from 2 to 6 m long and from 1.2 to 2.75 wide. In this case, the spacing ratio of transverse bar without spacing adjustment 1 mm from 50 mm to 400 mm, and of longitudinal bar - from 100 to 150 mm.

Welded meshes are made from reinforcing bars by resistance spot welding at the intersection of longitudinal and transverse bars in two mutually perpendicular directions using high-tech and high-precision up-to-date equipment.

We offer low-carbon steel reinforcing mesh of the following brands:
- cold deformed;
- A III 20 D 2 C hot-rolled;
- A III 25 D 2 C hot-rolled;
- A 240 hot-rolled;
- A 400 C hot-rolled;
- A 500 C hot-rolled;
- At 500 C cold deformed.

See also

Membership in the Chamber of Commerce and Industry of Ukraine