Ways to fasten the lattice flooring

One of the significant advantages of lattice flooring is the simplicity of fastening the lattice. Lattice flooring with the help of standard fasteners, which are manufactured by our factory, can be attached to almost any element of the load-bearing frame – I-beam, channel, angle, profile pipe. Fastenings of lattices occur without application of welding that allows to keep anticorrosive protection. All you need for installation is the simplest tool available on every construction site – ordinary wrenches. To calculate the number of fasteners, the standard rule – 4 pcs. per 1 m2, but not less than 4 pcs. on one lattice. That is, if the grilles come in a small size, such as 700x652 mm, for a secure fixation on such a grille also requires 4 pcs. fastening. If it is necessary to use several types of fasteners at the same level, the wiring diagrams indicate which fasteners need to be installed in a particular place. All types of attachments are as inconspicuous as possible and provide comfortable and unobstructed movement on the deck of both pedestrians and wheeled vehicles.

When developing mounting schemes for laying the lattice our specialists select the types of fasteners required in each case and make the appropriate specification, which is an integral part of the assembly diagram. Also, at the request of the customer, on drawings drawings of installation of fastenings can be put. Thus, when ordering a lattice flooring   the customer can be sure that the complete set of gratings with fasteners will be 100% in line with the technical   task.


Types of fasteners

Standard mounting is the most versatile type of mounting used to mount the lattice deck on elements that have a shelf – taur, I-beam, channel, angle


Self-tapping screw bracket This type of grille mounting is recommended to be used if the lattice flooring is subject to constant vibration-related loads to prevent self-unscrewing. The delivery set includes a bracket with a hole diameter reduced to 7 mm and a self-tapping screw according to the customer's wishes. The disadvantage of this type of fasteners is the need to replace the screws after each removal of the grille.

hooks

such fastenings are used in cases when there are no shelves on the supporting structure for pressing the lattice, for example: profile pipe channel turned wall towards the lattice angle of not less than 4 pcs . on one lattice. That is, if lattices are delivered of the small size, for example 700х652 mm, for reliable fixing on such lattice 4 pieces are required also. fastening.

If you need to use several types of fasteners at the same level, the wiring diagrams indicate which fasteners need to be installed in a particular place.

All types of fasteners are as inconspicuous as possible and provide comfortable and unobstructed movement on the deck of both pedestrians and wheeled vehicles.

Clamp for connecting gratings special type of fastening for connecting adjacent gratings. This type of fastening does not connect the grille to the load-bearing frame, but only combines the grilles placed side by side and thus turns the individual grilles into a solid deck. This prevents the grilles from slipping off the frame, and also eliminates possible height differences between adjacent grilles in cases where one of them is under heavy load and the other is not. This can happen, for example, when moving the truck on the bars.

Stair mounts

Fastening of steps to kosours occurs by means of usual bolts with nuts and washers. Hot-dip galvanized M8x35 bolts are available as standard.